Monitors and TVs

Hisense 32A5S Width in cm - Full Dimensions & Specs

4 September 2026

Introduction

If you're looking for the Hisense 32A5S width in cm, you've come to the right place. This popular 32-inch smart TV is a top choice for bedrooms, kitchens, and smaller living spaces. But before you buy, you need to know if it will fit your entertainment unit, wall bracket, or alcove. In this guide, we’ll give you the exact width, height, and depth in centimetres, along with tips on stand width, wall mounting, and viewing distance. By the end, you’ll have all the measurements you need to set up your new Hisense 32A5S with confidence.

Understanding the Hisense 32A5S Dimensions

When we talk about the Hisense 32A5S width in cm, you need to consider two measurements: the width of the TV itself (without the stand) and the width with the stand attached. The TV body is 72.5 cm wide (725 mm), the figure listed in the product specifications. Always check the official specs before making any furniture decisions.

Here’s a quick breakdown of the key dimensions you’ll need:

  • Width of TV (without stand): 72.5 cm (725 mm)
  • Height of TV (without stand): 42.6 cm (426 mm)
  • Depth of TV (without stand): 7.8 cm (78 mm, the thinnest point)
  • Width with stand: 72.5 cm (the feet sit inside the TV outline)
  • Height with stand: 45.5 cm (455 mm)
  • Depth with stand: 18.0 cm (180 mm)

The stand width is crucial because it determines the minimum width of your TV cabinet. If your cabinet is narrower than the stand, you’ll need to centre the TV or use a universal stand. Most TV unit tops are wider than 65 cm, so this should fit comfortably.

What Affects the Width Measurement?

Manufacturers often round off dimensions, so you might see 72 cm or 73 cm listed on different retailer sites. Also, if you add a soundbar or wall bracket to the back, your total depth will increase, but the width stays the same. Keep in mind that the stand adds around 10 cm to the depth, so allow for that when placing near a wall.

Ideal Spaces for the Hisense 32A5S

The Hisense 32A5S width in cm (72.5 cm) makes it incredibly versatile. It fits perfectly on:

  • Standard double bedside tables (typically 80-100 cm wide)
  • Small to medium TV stands (60-90 cm wide)
  • Kitchen countertops – especially if you have a breakfast bar
  • Dorm rooms and student accommodation – where space is tight

Because the TV is only 7.8 cm deep at its narrowest, you can also place it in an alcove or on a floating shelf. Just ensure the shelf can bear the weight (3.4 kg without the stand, 3.5 kg with it) and that there’s enough ventilation behind the screen.

How Much Room Should You Leave Around the TV?

For optimal airflow and safe usage, leave at least 10 cm of clearance on all sides. This prevents overheating and allows you to access the ports (HDMI, USB, etc.) which are usually on the left side or back. Good ventilation is especially important if you’re enclosing the TV in a cabinet.

TV Stand Width and Setup Tips

Many buyers are surprised that the stand width can differ from the TV width. On the Hisense 32A5S, the stand measures 63.4 cm across and 18 cm deep. This means the footprint is 63.4 cm wide, not the full 72.5 cm of the TV. That’s a neat trick – it allows the TV to sit on much narrower furniture.

Here’s a practical setup checklist:

  1. Measure your existing TV unit – note the width and depth.
  2. Compare with the stand dimensions – your unit should be at least 63.4 cm wide and 18 cm deep.
  3. If mounting on the wall, measure the VESA hole spacing on the back of your unit and choose a bracket that matches it.
  4. Centre the TV – use the speaker grille (if visible) to align it visually.
  5. Cable management – route cables through the stand’s cable tidies or a wall-panel kit.

These steps ensure you get a clean, safe installation without blocking any vents or connectors.

Wall Mounting: VESA and Depth Considerations

If you’re planning to wall-mount your Hisense 32A5S, the width measurement becomes less critical, but you’ll need to know the VESA pattern – that’s the distance between the four screw holes on the back of the TV. Check the VESA pattern printed on the back of your unit before buying a bracket, and choose a mount that matches the spacing you measure.

When purchasing a wall mount, ensure it can support at least 5 kg, comfortably above the TV’s weight of 3.4 kg without the stand. Also, measure the depth of the mount – slim mounts are about 2-3 cm deep, while tilting mounts can be 5-8 cm. Add this to the TV depth (7.8 cm) to get the total distance from the wall to the front of the screen. This helps you choose the right viewing height and avoid the TV sticking out too far.

Pro Tip: Use a Spirit Level

Always use a spirit level when marking the drill holes. A slightly tilted TV looks unprofessional and can strain your neck. If you’re unsure, many online guides show step-by-step wall mounting for 32-inch TVs.

Replacing an Older 32-inch TV

If you’re upgrading from an older 32-inch model, the chances are high that your new Hisense will be very similar in footprint. This means you can reuse your existing TV stand or wall bracket – just double-check the VESA hole pattern first: the Hisense 32A5S uses a 100 x 100 mm VESA interface.

Viewing Distance and Optimal Placement

Knowing the Hisense 32A5S width in cm isn’t just about fitting; it’s also about viewing pleasure. For a 32-inch TV, the recommended viewing distance is between 1.2 to 2.1 metres. At this distance, you’ll enjoy a crisp picture without noticeable pixels.

If you’re placing the TV in a bedroom, position it at eye level when you’re sitting up in bed. This usually means the centre of the screen should be about 1 metre above the floor. In a kitchen, keep it high enough to see over countertops – but tilt it slightly forward to reduce glare.

Adjusting the Stand Height

The Hisense 32A5S has a fixed stand height (there’s no height adjustment). The TV sits about 3 cm taller with the stand, so factor that into your shelf clearance. Most TV stands have adjustable shelves, so you can easily accommodate this.

Frequently Asked Questions

1. Exactly how wide is the Hisense 32A5S in cm?

The Hisense 32A5S is 72.5 cm wide (725 mm) without the stand. With the stand the width is the same, because the feet sit within the TV’s outline. The 81.3 cm in the product name is the screen diagonal (32 inches), not the width.

2. What is the depth of the Hisense 32A5S including the stand?

The depth of the Hisense 32A5S increases from 7.8 cm (TV only) to approximately 18.0 cm when you attach the stand. This extra depth helps stabilise the TV and prevents it from tipping forward. Always ensure your TV unit has at least 20 cm of usable depth.

3. Can I use a universal wall mount for the Hisense 32A5S?

Yes, the Hisense 32A5S is VESA-mountable. Measure the hole spacing on the back of the unit and pick a bracket that matches it with a capacity of 5 kg or more; the TV weighs 3.4 kg without the stand. Always follow the manufacturer’s installation instructions, and if you’re unsure, hire a professional.

4. Does the stand width of 63.4 cm mean the TV will fit on a 65 cm wide unit?

Technically, yes – the 63.4 cm stand fits on a 65 cm wide unit, but you’ll have no margin for error. We recommend a unit at least 70 cm wide so both feet rest well inside the top edge. Overhanging can be a safety hazard, especially with children or pets.

5. Is there a difference between the width and the screen size?

Yes, the width is the full physical measurement from left to right, including the bezel. The screen size (32 inches) is measured diagonally from corner to corner. So a 32-inch screen doesn’t mean the TV is 32 inches wide – in fact, it’s usually around 72-74 cm (about 29 inches); the Hisense 32A5S measures 72.5 cm. This is why checking the exact width is essential for fitting.

Final Thoughts: Get the Right Fit for Your Space

Now you know that the Hisense 32A5S width in cm is 72.5 cm, with a stand 63.4 cm across. This makes it a solid choice for compact living spaces without sacrificing screen size or smart features. Remember to measure your furniture and doorways before purchase, and always account for ventilation and cable clearance.

If you’re ready to buy or just want to see the latest price, check stock and delivery options for the Hisense 32A5S. We ship across Spain and the European Union, and our team is happy to answer any further fitment questions. Enjoy your new Hisense – with the right dimensions, you’ll set it up in minutes!